K65 is a PEMF red light near-infrared heating belt using nano-tourmaline micro-ceramic balls. The product combines adjustable heating, dual-coil PEMF and dual-band photonic lamp beads in a wearable belt structure, suitable for home relaxation, waist and abdomen warming experiences, SPA, health care stores and wellness spaces.
What is the K65 Multi-Function Heated Belt?
K65 adopts a long wrap-around design, with product dimensions of approximately 10 × 55 inches, equivalent to approximately 24 × 140 cm. The belt can be fixed around the waist, abdomen or outside of the back, suitable for warm and daily relaxation scenarios that require a larger coverage area.
Theproduct uses nano-tourmaline micro-ceramic balls inside and is equipped with thermal, PEMF and photon lamp bead modules. The warming system provides an adjustable hot compress experience; the PEMF module generates pulsed electromagnetic fields through 2 coils; the photonic module uses 660 nanometer red light and 850 nanometer near-infrared lamp beads.
Why choose K65?
- Long size wrap structure: The waistband length is about 140 cm, which can cover a larger waist, abdomen and back area.
- Tourmaline micro-ceramic balls: uses nano-tourmaline micro-ceramic balls as the internal material of the product to form a warm belt with the characteristics of mineral materials.
- Dual Coil PEMF: has 2 built-in PEMF coils with frequency setting range from 3 to 64 Hz.
- Dual-band photon lamp beads: is configured with 26 660 nm visible red light lamp beads and 28 850 nm invisible near-infrared lamp beads.
- Adjustable temperature: Temperature range is 30 to 70 degrees Celsius, which is 85 to 159 degrees Fahrenheit.
- Timing control: supports timing from 1 to 12 hours, and the running time can be set according to the usage scenario.
- Dual-voltage configuration: is available in 110 to 120 volt and 220 to 240 volt specifications to suit different target markets.
K65 work?
K65 has 2 built-in PEMF coils with frequency setting range from 3 to 64 Hz. Two coils are distributed in the main use area of the belt and generate pulsed electromagnetic fields through the controller. PEMF, thermal and photon lamp beads belong to different modules, and the specific operation methods should be carried out according to the product controller and instructions.
PEMF parameters cannot be judged based on the number of coils alone. The purchaser also needs to combine the frequency range, controller mode, coil position and target market usage instructions to confirm whether the product configuration meets the brand project requirements.
K65 red and near-infrared lamp bead configuration
K65 is equipped with a total of 54 photon lamp beads, of which 26 are 660 nm visible red light beads and the other 28 are 850 nm invisible near-infrared lamp beads. The two bands have different visibility and light source parameters and should not be described as functionally equivalent.
850 nanometer near-infrared lamp beads cannot be judged by the naked eye whether they are lit or not during operation. Product inspection and batch quality inspection need to be completed according to lamp bead parameters, controller status and corresponding detection methods.
Product Specifications
- Product model: K65
- Product type: Tourmaline PEMF red light near-infrared heating belt
- Product Dimensions: Approximately 10 × 55 inches
- Metric dimensions: approx. 24 × 140 cm
- Product Weight: Approx. 10 lbs., Approx. 4.5 kg
- Internal material: Nano tourmaline microceramic balls
- PEMF coil: 2
- PEMF Frequency: 3 to 64 Hz
- Total number of photon lamp beads: 54
- 660 nanometer red light beads: 26
- 850 nanometer near-infrared lamp beads: 28
- Power rating: 90 watts
- Voltage specifications: 110 to 120 volts or 220 to 240 volts
- Temperature range: 30 to 70 degrees Celsius
- Fahrenheit temperature range: 85 to 159 degrees Fahrenheit
- Timing range: 1 to 12 hours
- Storage configuration: equipped with portable storage bag
Applicable scenarios and usage
K65 can be fastened around the waist, abdomen or outside of the back for daily rest, reading, office breaks and relaxing before bed. SPA, yoga studios, health management stores and wellness spaces can also use it as a wearable thermal care product.
You can start with a lower temperature and a shorter time for first use to ensure that the belt is flat and fixed to avoid over-tightening. The heating area should not be folded during use, nor should the controller or power interface be covered.
If you want to view more belt products, you can visit Heated Belt Product Category. For bulk purchasing or supplier cooperation, you can view the wholesale supplier page.
Wholesale, supply and OEM, ODM customization
K65 is suitable for heating belt manufacturers, health care product suppliers, wholesalers, distributors, SPA brands and wellness project procurement. Bulk items can be confirmed around tourmaline material, belt size, fixing method, controller, voltage, plug, packaging and instruction language.
OEM, ODM and private label projects can customize brand logo, surface fabric, controller interface, storage bag and outer packaging. Factory direct supply projects can also configure corresponding voltages, plugs and instructions according to the target market, and establish sample confirmation, batch quality inspection and delivery processes.
Precautions for use
K65 is a health care and relaxation product and should not be used as a substitute for medical diagnosis, medication or regular treatment. People who have pacemakers or other implantable electronic devices, are pregnant, are sensitive to heat, have sensory impairments, or are receiving important medical treatment should consult a medical professional before use.
During use, you should avoid tightening the belt excessively to prevent prolonged pressure on the skin. Turn off the power and disconnect the plug before cleaning to prevent moisture from entering the belt, controller and interface. If abnormal fever, circuit damage, odor or other obvious discomfort occurs, you should stop using it immediately.
